Please read carefully the description!
This is a DXF (laser cutting) and PDF pattern for download. This is NOT the finished product.
All our files are our own and therefore our intellectual property. Reselling, altering files, giving others away for free is a violation of the intellectual property law. Violation of this rule will be reported.
Leather pattern in DXF and PDF files for military style backpack with two small exterior pockets, pocket for the notes and pens. We have also added two straps at the bottom of the backpack that will allow you to fasten a jacket or blanket. The backpack is fastened with two straps with buckles.
- The PDF file contains REAL SIZE PATTERNS for every piece required to complete the design.
- Print 100% size
- Pattern is designed for hand stitching
Link to video tutorial:
https://www.youtube.com/watch?v=VIor1Ra-gdA&ab_channel=TreeHouseLeatherHM
I recommend using thick natural leather at least 6 Oz (2.2- 2.6mm thick Vegetable Tanned Leather) for getting the best results.
The tools required are:
- a regular cutter,
- a single hole puncher,
- edge beveller
- two needles
- hammer
Hardware for the backpack:
- 9 x buckle (20mm)
- 4 x D-ring (20mm)
- 2 x bag trigger hooks (20mm)
- 4 x rivet
Due to the possible minimum differences in the distance between the holes, we recommend using single hole punch (for PDF).
Dimensions of the finished backpack (fits for items in A4 size):
21.5 cm x 31.5 cm x 9 cm / 8.46'' x 12.40'' x 3.54' + pockets 2 x 14 cm x 5.5 cm x 4 cm / 2 x 5.51'' x 2.16'' x 1.57'' + backpack straps as long as You need
Measurement of the leather You will need to finish this project:
90 cm x 90 cm / 35.43'' x 35.43''
