Leather Belt Bag Pattern – Satchel & Crossbody PDF Template

Make two different leather belt bags from one printable PDF pattern set, with options to turn the same core designs into a satchel bag or small crossbody bag.

The pattern includes a smaller horizontal version and a larger vertical version. Both bags feature a small interior pocket suitable for a phone or other everyday essentials.

You can also choose between two fastening styles — a buckle with magnetic closure or a traditional buckle closure — plus two belt-loop configurations.

This is a DIGITAL PDF PATTERN ONLY. No finished bag, leather, hardware or tools are included.

What You Get

• Printable PDF pattern – A4
• Printable PDF pattern – A1
• Printable PDF pattern – US Letter
• Full-size pattern pieces
• Two bag sizes
• Belt bag, satchel and crossbody configuration options
• Pattern designed for hand cutting and hand stitching
• Video tutorial

Video tutorial:

https://www.youtube.com/watch?v=FoQdnlN2a0Y

Print the PDF at 100% / Actual Size.

Important – Not for Laser Cutting

These PDF files are intended for manual leatherworking only.

They are watermarked and are not designed for laser cutting machines.

The watermark must not be removed or altered.

Finished Size

Small Bag

• 12.5 × 19 × 5.5 cm
• 4.94 × 7.48 × 2.16 in

Add a shoulder strap in your preferred length if making the crossbody version.

Large Bag

• 19 × 17.5 × 6 cm
• 7.48 × 6.88 × 2.36 in

Add a strap in your preferred length if making the satchel version.

Recommended Leather

For the best result, use approximately:

• 2.0–2.4 mm / 5–6 oz vegetable-tanned leather

Approximate leather required:

Small bag:

• 48 × 45 cm
• 18.89 × 17.7 in

Large bag:

• 54 × 48 cm
• 21.26 × 18.89 in

Additional leather will be required if you make a shoulder or satchel strap.

Hardware Required

Depending on the version you make, you will need:

• 1 × 25 mm D-ring
• 1 × 25 mm buckle
• 1 × 20 mm buckle
• Bag clasp / lobster clasp

Hardware is not included.

Tools

Basic leatherworking tools are required:

• Craft knife
• Single-hole punch
• Edge beveller
• Two stitching needles
• Hammer or mallet

Because very small differences in printed hole spacing can occur depending on printer settings, we recommend using a single-hole punch.

Skill Level

Beginner

The construction is designed to be straightforward and easy to follow, making this a good project for leatherworkers who want to build practical belt bags and small shoulder bags.

Digital Product Only

This product is supplied as downloadable PDF files only.

No physical item will be shipped.

The finished bags shown in the product photographs are examples of what can be made using the pattern.

The digital files are for the purchaser's use only and may not be resold, shared, redistributed or offered for free. The watermark may not be removed or altered.